3 DIY Garage Gym Ideas (That You Can Do Today!)

DIY Garage Gym Ideas

Building out my garage gym is one of the best decisions I’ve ever made. Having immediate access to a gym where I can get in a workout on my schedule is simply unbeatable. I couldn’t recommend it enough to anyone who loves working out.

The only downfall is that when you’re first starting out, a garage gym can get pretty expensive pretty fast. The cost of equipment like barbells, racks and platforms can really add up.

One way to offset those costs is to build some of that equipment yourself. I’ve built many of the pieces that I use in my garage gym and in this article I want to share with you a couple DIY Garage Gym ideas that you could start (and finish) today.

Before we go any further, I do want to make one thing very clear. If you are building a piece of equipment yourself, you have to be 100% sure that that piece of equipment is safe to use. Garage Gym DIY or myself are not responsible for any damage/injury to you or your property because of something you attempted to build yourself.

Bottom line – be smart when making your own lifting equipment.

The 3 projects that I’m going to share with you will give you everything you need (along with a barbell and plates) to get started working out in your garage. These are a squat rack, a platform and a horizontal plate storage rack.

With these three pieces of equipment you can perform an almost endless amount of lifts and workouts. Everything else you add to your garage gym is really gravy.

Links on this page may be affiliate links. If you make a purchase I may, at no extra cost to you, earn a commission. All reviews are my honest opinion and I don’t review anything that I haven’t used personally. Ever. Learn More

DIY Garage Gym Idea #1 – Squat Rack

Cost: $60 ($58.04 to be precise)

Time to Complete: 1 Afternoon

Potential Savings: Racks vary widely in price, but at least a couple hundred dollars

Why DIY?: A quick search through the internet and you can find a bunch of different ways to build your own DIY Rack. So why did I choose to make mine the way I did?

I chose my design for two main reasons. First, I don’t have ‘Bob Villa-esque’ tool resources at my disposal. So, I wanted a design that I could make with a simple set of tools. The ‘fanciest’ tool I used to build my rack was an electric drillOpens in a new tab.. The only other tools I needed were a hand saw, measuring tape, leveler and a stud finder.

The second reason was I wanted something that would be solid and sturdy for the lifts that I wanted to do. Let me explain. I wanted, essentially, a squat stand. I wasn’t concerned about using it to bench press. I needed a rack that allowed me to back squat. Any other use I got out of it was a bonus.

However, most squat stands, even commercial ones are not super sturdy. I addressed this issue by anchoring my rack to the wall. Now I don’t have to ever worry about my squat rack tipping over.

I’m telling you all this because this thought process is how you should determine what YOU want from YOUR squat rack. Figure out what you need from a rack and go from there. Is bench pressing important to you? I wouldn’t go with my design. Do you need a low cost, easy to build squat stand? My rack has worked out great for me.

How To: I’m going to give you the brief rundown on how I built my rack. If you’re interested in building your own, make sure to check out my complete step-by-step guide on how I built my squat rack.

The build is pretty simple really. Find the studs in your wall and drill two 2x8s into the wall. These will be used to anchor the rack itself. MAKE SURE YOU FIND AND DRILL INTO THE STUDS!!! Otherwise your rack is going to rip out your entire wall.

Next, cut 4 of the 4x4s to the desired height of your squat rack. This will vary depending upon your height and preferences. Using brackets, secure 2 of the 4x4s to the 2x8s on the wall. These will act as the back two vertical beams for your rack.

DIY Squat Stand
My first official DIY Garage Gym project. A super simple design made with simple tools, but it’s been a beast for me for over six months now.

Now cut 2 of the 4x4s to length you want your horizontal beams to be. I made mine 36″ which have worked out just fine, but if I had it to do over again I would make them about 6″ to 8″ shorter. I don’t need as much room “inside” the frame to rack and unrack weight as I thought I would need.

Attach the horizontal beams to the front two vertical beams with brackets and finally attach the front of the rack to the back of the rack.

I know I’m making it sound it easier than it really is, but in a way I’m actually not. It really is that straight forward. Just make to double or even triple check your measurements, make straight cuts so everything lines up flush and test, test, test before you put any real amount of weight on it.

I can’t emphasize enough that you have to make 100% sure that your build is done correctly. Having your rack break or fall apart when racking a set of squats could lead to serious injury.

If you’re worried about using a wood rack instead of steel, I was too. Then someone pointed out to me, “What do you think holds up your house?” That changed my perspective a bit on how much weight wood can hold if built properly.

DIY Garage Gym Idea #2 – Lifting Platform

Cost: $198 (This is including $20 to rent a truck from Lowe’s to haul everything to the house)

Time to Complete: An afternoon

Potential Savings: Minimum $300+ dollars

Why DIY?: The reason to DIY your lifting platform is because it is way easier to build than you would ever think. It’s actually the easiest to build out of the three in my opinion.

More importantly, the reason to have a platform is to protect your equipment and probably more importantly (I say probably because I really care more about my Uesaka equipment than I do my floor, but the “adult” in me says otherwise) your garage floor. Dropping weight, especially in the same spot over and over again, can potentially turn your garage floor into rubble.

Could you be okay with just some 3/4″ horse stall mats? Probably, but maybe not. With a platform being so easy (and relatively cheap) to make, why take the risk? A platform can add another inch plus of protection. And they’re super badass to lift on.

How To: Again, I’m going to go through the quick and dirty how-to, but for a full detailed how-to guide check out How to Build a DIY Lifting Platform.

The key to the whole build is planning out the size of your boards and getting them cut to the right specifications, which you can get done right at Lowe’s.

I made my platform six feet by eight feet. Because of the squat rack I already had built, I had no intention of putting a squat rack on top of platform so their was no need to make it any bigger than 6×8.

DIY Platform
My pride and joy. This DIY Platform is the centerpiece of my garage gym.

The two bottom layers are OSB Sheething Boards. The bottom most layer should be a 4×8 and a 2×8. Then place two 6x4s directly on top perpendicular to the bottom boards.

Next, lay the 2×6 board down in the center of the rack that you’re going to use as the platform itself. I used Pine for my platform and it’s worked great.

Finally, and this by far the biggest pain in the rear of the whole project. Cut a 4×8 horse stall mat down the center to make two 2x6s. These will act as your drop zones on each side.

Boom. Done. Other than cutting the horse stall mat, a platform is really easy to build. My only regret is not building mine sooner.

DIY Garage Gym Idea #3 – Horizontal Plate Storage

Cost: $12

Time to Complete: A couple hours

Potential Savings: Around $100 (per box – if you have two, double it)

Why DIY?: Sooner or later you’re going to get annoyed with plates laying on the ground or against the wall all the time and will want something to make your gym more organized.

Steel plate storage racks are outrageously expensive and a DIY wood storage box is cheap and easy to make. It’s also customizable to be the size and the amount of slots you want. Finally, and this is my opinion, I think they actually look better.

How To: Not to sound like a broken record here, but again, I’m going to give you the cliff note version here, but if you wan the full guide check out How to DIY a Horizontal Plate Storage Rack.

This isn’t necessarily the hardest of the three to make, but it is probably the most tedious. Making this storage rack requires a bit more patience than the other two just because it’s a lot of measuring and drilling.

Finished DIY Plate Storage
Works Great! Looks Great! All for $12!

Before you begin, I recommend figuring out exactly what you plan on housing in your storage racks. I wanted each of my racks to be able to hold 4 20kg plates, 2 10kg plates and then a couple slots for some smaller 2.5s, 5s and 10s. Knowing what you want to go in your rack will help you determine the size of each slot.

Once you have planned out your rack, start off by making a frame. My frame consisted a two 31″ 2x4s for the sides and 2 17″ boards for the ends. You can actually go ahead and cut all of your “end” and “slot” boards because they’ll all be the same size. I ended up with 9 17″ boards total.

Once your frame is built start placing your slot boards and drilling them in one at a time.

I made my 20kg plate slots 2 1/2″ wide and my 10kg plate spots 2″ wide. I also made the slots for my “change” 2″ wide just to keep the front slots uniform.

Like I said before, it’s a bit tedious so take your time and take a break if you need to rather than getting impatient, rushing through and making a mistake you’ll kick yourself for later.

Once you’ve finished drilling in all your slot boards you can paint the box if you like or just keep it au naturale. Personally, I like the look of the wood itself and I don’t paint any of DIY Equipment. But, if you want get a certain style or look going for your garage gym, go for it.

Final Thoughts

These 3 DIY Garage Gym Ideas will definitely get you started down the path to plenty of big lifts and big gains in your garage. A few final thoughts on these DIY ideas:

  • Don’t be intimated by building stuff yourself. All 3 of these projects can be done by anyone that puts in the effort and has good attention to detail.
  • DIYing some of your own garage gym equipment is an excellent way to save money (that can then be used to buy more equipment)
  • My final point which I’ve already made a couple times, but bears repeating: make sure you double and triple check that what you have built is safe and secure. If you’re not 100% sure that it is safe, DO NOT use it. These checks should be done not just once, but periodically throughout the entire time you use the equipment.

Stay Strong!

Ryan H

My name is Ryan Horton and I've spent the last 18 years as a Collegiate Strength and Conditioning Coach and am currently the Director of Sports Science with Georgia Tech Football. I've always set up workout areas at home everywhere we've lived, but now I have a garage and I'm going all out.

Recent Posts